Three round frosted heads on a slim white bar — a clean, symmetrical light for above a bathroom mirror or vanity. The heads sit close against a simple back plate, so it reads as one quiet line across the wall rather than three separate fittings. Rated IP44 against splashing water, so it can be used in a bathroom when fitted outside the immediate splash zones.
Key Features
-
Three round LED heads on a slim white bar — even, symmetrical light across a mirror
-
Choose your light colour — warm white, neutral white or cool white, selected above
-
IP44 rated — protected against splashing water, suitable for bathroom use outside the immediate splash zones
-
Integrated LED — no bulbs to buy and none to change
-
Light and easy to fit at 0.7 kg
-
White metal and acrylic — a quiet finish that suits modern and minimalist bathrooms
Choosing Your Light Colour
The colour of the light is fixed and is chosen when you order — it does not switch over once the fitting is installed.
-
Warm white — soft, yellow-toned light, closest to a traditional bulb. Best for a relaxed bathroom or a bedroom wall.
-
Neutral white — clean and balanced, neither yellow nor blue. The safest all-round choice and the most natural for a mirror.
-
Cool white — bright and crisp. Best for shaving, make-up and close detail work.
Specifications
-
Type: Wall-mounted mirror and vanity light, three heads
-
Colour: White
-
Materials: Metal body with acrylic diffusers
-
Light source: Integrated LED — not user-replaceable
-
Light colour: Warm white, neutral white or cool white — fixed, chosen at order
-
Dimmable: No
-
Smart enabled: No
-
IP rating: IP44 (protected against splashing water)
-
Power: 220–240V 50Hz UK mains, hardwired — no plug or flex fitted
-
Weight: 0.7 kg
-
Suggested room size: 5–10 m²
-
Use: Indoor only
Where It Works
Above a bathroom mirror or vanity unit, where the three heads spread light evenly across your face instead of throwing it from one side. It also suits a bedroom dressing mirror, a cloakroom or a hallway wall.
Installation
This is a hardwired fitting. It arrives with no plug and no flex, and must be wired into your mains lighting circuit by a qualified electrician. In the UK, electrical work in a bathroom is notifiable under Part P of the Building Regulations. IP44 means the fitting is protected against splashing water, so it can go outside the bath and shower zones, but never inside the bath or shower itself. Ask your electrician to confirm the zone, that the circuit is RCD protected, and that the wall fixing is sound for the 0.7 kg fitting.
Care
Switch the light off at the wall and let it cool before cleaning. Wipe with a soft dry or barely damp cloth. Keep bathroom sprays, bleach and abrasive cleaners away from the white finish and the acrylic diffusers, and never spray liquid directly at the fitting.
Good to Know
Indoor use only. The LEDs are built into the fitting and cannot be changed like a bulb.
